What to do if your radio does not turn on

Here are some things you do when the car refuses to turn on the radio.

1) Check first if your ignition is turned on and your band radio is properly connected.

2) Make sure that the belt contacts / connections are not worn and that the band is good, solid
to contact. Because the band was removed, over time the contacts and the contacts on the first page
Back of the radio may be dirty or worn. For best results, use with gasoline or cleaningfind
more about how to clean the contacts, refer to the radio.

3) Press the "Reset" button if your radio, and then check for proper operation. Ask your
Radio Guide for details.

4) Check Auto-backup (see No. 6 and 8).

5) If the radio does not have a "reset" button, leave the radio from the dashboard and physically
Unplug the power cord and reconnect it and check for proper operation.

6) Do not leave your radio and check whetherthe backup that is built on the back of the radio (where
) Available is not burned, and make sure that all connections are secure and correct. Especially
Check the integrity of the earth, 12V and 12V power cable connections to live permanently. These are
I'm black, yellow or red.

7) If an adapter wiring is safe, that the pens are aligned with existing car radio
Connector and the radio has ISO connectors. Make sure that some do notslightly bent. Inspect very
closely.

8) Verify that the radio is always power. You may need a test light or the force sensor for this application.
But first check the fuse for the radio fuse in your garage that is installed. Consult the manual car
for the position of the radio fuse.

If the problem persists after the above, consult an expert in car audio.